Не е налична версия с по-висока разделителна способност.
Plane_parts.jpg (640 × 480 пиксела, големина на файла: 60 КБ, MIME-тип: image/jpeg)
Този файл е от Общомедия и може да се използва от други проекти.
Следва информация за файла, достъпна през оригиналната му описателна страница.
Резюме
Parts of a Plane
This image shows two types of planes (woodworking tools)
and labels some of the parts.
A: The mouth is an opening in the bottom of the plane down through which the blade extends, and up through which wood shavings pass.
B: The iron is a plate of steel with a sharpened edge which cuts the wood. Some people refer to it as the blade.
C: The lever cap holds the blade down firmly to the body of the plane.
D: The depth adjustment knob controls how far the blade extends through the mouth.
E: The knob is a handle on the front of the plane.
F: The chipbreaker or Cap iron serves to make the blade more rigid and to curl and break apart wood shavings as they pass through the mouth.
G: The lateral adjustment lever is used to adjust the iron by skewing it so that the depth of cut is uniform across the mouth.
H: The tote is a handle on the rear of the plane.(Some aficionados object to the use of the word tote preferring handle).
I: The finger rest knob Block planes are held in the palm of the hand while the tip of the user's index finger rests in the indentation on top of the knob. On some planes the knob is used to adjust the size of the mouth by allowing a sliding portion of the sole to be moved back or forward to accomplish this.
J: The frog is a sliding iron wedge that holds the plane iron at the proper angle. It slides to adjust the gap between the cutting edge and the front of the mouth. The frog is screwed down to the inside of the sole through two parallel slots and on many planes is only adjustable with a screwdriver when the plane iron is removed. Some planes, such as the Stanley Bedrock line and the bench planes made by Lie-Nielsen and WoodRiver/WoodCraft have a screw mechanism that allows the frog to be adjusted without removing the blade.
There is also an unlabeled image for translation purposes.
да споделяте – да копирате, разпространявате и излъчвате произведението
да ремиксирате – да адаптирате произведението
Съгласно следните условия:
признание на авторството – Трябва да посочите авторството, да добавите връзка към лиценза и да посочите дали са правени промени. Можете да направите това по всякакъв разумен начин, но не и по начин, оставящ впечатлението, че същият/същите подкрепят вас или използването по някакъв начин на творбата от вас.
споделяне на споделеното – В случай, че промените, видоизмените или използвайки като основа произведението, го надградите, то полученото производно произведение може да се разпространява само съгласно условията на същия или съвместим лиценз с оригиналния такъв.
This licensing tag was added to this file as part of the GFDL licensing update.http://creativecommons.org/licenses/by-sa/3.0/CC BY-SA 3.0Creative Commons Attribution-Share Alike 3.0truetrue
Parts of a Plane This image shows two types of planes (woodworking tools) and labels some of the parts. There is also an unlabeled image for translation purposes. The image was created by User:etune. on http://en.wikipedia.org/wiki/Image:Plane_pa
Файлът съдържа допълнителни данни, обикновено добавяни от цифровите апарати или скенери. Ако файлът е редактиран след създаването си, то някои параметри може да не съответстват на текущото изображение.